Low side Fuel Rail Pressure Sensor too low B1 – Monitored fuel data in scan tool: – Low side F/P reading – 108psi w FRP at 0psi – desired F/P=68psi – RECOMMEND REPLACING LOW SIDE FUEL PRESSURE SENSOR
Replaced pressure sensor – Actual fuel pressure is same as desired fuel pressure – Fixed
Andrew L. gave our service a 5 star review on 11/10/2021
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
Natalie H. gave our service a 5 star review on 2/15/2021
Road test vehicle. Check all suspension and steering parts for wear. Check tire pressure and condition. Check riding height. Check alignment of all four wheels. Adjust caster, camber, toe-in, and thrust angle as needed on all four wheels. Center ste
TIE ROD &/OR END – Remove & Replace – Inner,Both – [Includes: R&I Outer Tie Rod Ends.] – [Includes: Adjust toe-in only. NOTE: Deduct .4 if alignment is also performed. NOTE: Manufacturer recommends removal of Rack and Pinion Steering Gear when replacing I
Mick S. gave our service a 5 star review on 12/17/2020