Check brake fluid for moisture and contamination. Inspect all hydraulic line and hoses. Inspect calipers and wheel cylinders. Inspect master cylinder and cap. Flush entire brake system including master cylinder, calipers, wheel cylinders until clean.
AIR CLEANER ELEMENT – Remove & Replace – Both
CABIN AIR FILTER – Remove & Replace
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures.
Willie A. gave our service a 5 star review on 6/14/2024
Technician noticed serpentine belt is extremely noisy on startup – goes away after engine is at operating temp. – RECOMMEND REPLACING SERPENTINE BELT – PULLED CODES – – P1715 – Input speed sensor primary speed – P0705 – Transmission range sensor – A circuit – (PRN"D"L)input – TECHNICIAN CLEARED CODES AND TEST DROVE VEHICLE CODES DID NOT RETURN AT THIS TIME – TRANSMISSION IS VERY NOISY AND SHUTTERS WHILE ACCELERATING AT LOW SPEEDS – FLUID IS BURNT – RECOMMEND REPLACING TRANSMISSION ASSEMBLY AND SERPENTINE BELT
Mark I. gave our service a 5 star review on 5/2/2024
Lubricate and check chassis. Change oil and oil filter. Check all fluid levels and tire pressures.
Replace front brake pad linings and rotors. Clean and lubricate brake calipers and slide mechanisms. Check and fill brake fluid. Bleed air from system. Road test vehicle.
Left rear door lock actuator inoperative
Replace light bulb – left tail light
DOOR LATCH – Remove & Replace – Rear,One Side
Janine M. gave our service a 5 star review on 12/1/2023